Hitemp Ceramic Industries

Started way back in 1972 located in Muzaffanagar (U.P), first of its kind in North India. We at hitemp are serving wide varities of industries & research establishments incorporating new techniques to meet international standards. We have a team of dedicated Engineers for R&D to improve upon products, develop new products & to meet out commited delivery schedules . Under one single roof we are providing best ceramics & refractories. Besides this we also provide technical support & solutions to our customers.

 Hitemp has many in-house manufacturering facilities like:
» Slip Casting
» Vacuum Extrusion
» Tabletting Press
» Mechanical Pressing
» Pneumatic and Vibratory Press
» Green Machining
» FiringOther facilities Like Isostatic Pressing And Lappin. Are in The Pipeline.

Kiln Furniture

These are used for holding the material to be heated & to optimise the furnace loading . These have high thermal shock resistance , high Refractoriness under load, High Cold Crushing strength & repeated heating & cooling Cycles. At Hitemp we are manufacturing Mullite & Alumina Kiln Furniture. Mulite Refractories Properties Unit HWHF Max hot face temp Deg C 1700 Bulk Density g / cc 2.65 Apparent Porosity   17.5 Cold Crushing Strength Kg / cm2 1000 MOR at Room Temp 175 MOR at 1350 100 Reheat Change % at1450 deg / 6Hrs +/- 0.1 Thermal Conductivity % W / m deg K     At 800 deg 1.68   At 1000 deg 1.61   At 1200 deg 0.60 Chemical analysis AL2O3 Min   77.42   Sio2 Max  21.01   Fe2O3 Max 0.19

	Super Refractory Shapes
	Specifications Properties Unit 132 HB201 HB101 Max Hot Face Temp Deg C Max 1700 1750 1800 >Bulk Density g/cc Max 1.37 1.48 1.52 Apparent Porosity Min 50 45 45 Cold Crushing Strength Kg/cm2 Min 35 90 60 Reheat Change At 1450 deg / 24 Hrs Max +/-0.65 +0.65 at 1650 +0.41 Thermal Conductivity Maximum       W/mdeg K at 400 deg 0.28 0.70 1.60 1.60 At 600 deg 0.70 1.60 1.55 At 800 deg 0.55 1.50 1.30 At 1000 deg 0.65 1.30 1.30 At 1200 deg 0.70 1.30 1.30 Chemical Analysis Al2O3 Min 72 90 98 Sio2 Max 24 9 1 Fe2O3 Max 0.5 0.3 0.2
	Data is for general guidance only. Hitemp insulation refractories are meant for applications where high mechanical stability and insulating properties are required. Hitemp refractories are best suited for insulation of kilns and furnaces, both as hot face and back up linings. Hitemp refractories can be used for applications upto 1850 deg. The HB201, HB101bubble alumina range of insulating refractories is light weight, has good load bearing capacity and low heat capacity. They can be directly exposed to flame also.
	Contact Us Hitemp Ceramic Industries Mr. Shamit Agarwal Work & Office: - 870, South Bhopa Road, Muzaffarnagar (U.P.) INDIA Phone: +91-131-2604386,  Fax: +91-131-2603486 Email: hitempceramics@gmail.com  Website: www.hitempceramics.com

Laboratory Furnace Parts

MUFFLES Muffles are mainly used in muffle furnaces where heating elements made out of kanthal / Nircrome wires wraped round the muffles generally in the form of coils & inside these muffles objects are kept for heating either for laboratory or industrial purposes. these muffles are made in different Square/ rectangular dimensions . Hitemp Muffels are thin walled for quicker heating. These are rodust in constructions Highly thermal shock resistant.     Rectangular Muffles (Unequal Sizes) Size (Inches) 3 x 4 x 9 3 x 4 x 10 3 x 4 x 15 3 x 4 x 18 4 x 5 x 12 4 x 6 x 12 4 x 7 x 10 4 x 8 x 12 5 x 7 x 14 5 x 7 x 19 6 x 8 x 13 Rectangular Muffles (Equal Sizes) Size (Inches) 4 x 4 x 4 4 x 4 x 6 4 x 4 x 9 5 x 5 x 10 5 x 5 x 12 6 x 6 x 12 7 x 7 x 15 7 x 7 x 19 8 x 8 x 12 8 x 8 x 18 9 x 9 x 12 9 x 9 x 18 10 x 10 x 12 10 x 10 x 15

	GROOVED REFRACTORIES Grooved refractories are mainly used in High temperature muffle furnaces. The heating coils made out of kanthal / Nircrome wire coils in U Shapes are placed in the groove of the refractories. Higher temperature in these furnaces is achieved as objects are heated directly by radiation . Hitemp Grooved refractories are thin walled & light weight for faster heating . By using Hitemp Grooved refractories peak temperature is attained in almost 1/4th the time as compared to conventional grooved refractories available in the market.These are robust in constructions Highly thermal shock resistant.
	GROOVED REFRACTORY Size (inches) 4 x 4 x 9 5 x 5 x 10 6 x 6 x 12 7 x 7 x 9 8 x 8 x 12 12 x 12 x 12 18 x 18 x 9 BUNSEN BURNER CRUCIBLES Hitemp Bunsen burner crucibles are used to support heating element on the outer side of their conical structure & inside provides sufficient space for keeping small samples or test tubes. Contact Us Hitemp Ceramic Industries Mr. Shamit Agarwal Work & Office: - 870, South Bhopa Road, Muzaffarnagar (U.P.) INDIA Phone: +91-131-2604386, Fax: +91-131-2603486 Email: hitempceramics@gmail.com Website: www.hitempceramics.com

Ceramic Furnace Supports

Ceramic Furnace Supports : ELEMENT SUPPORTING TUBES/ ROUND MUFFLES Hitemp Element supporting tubes are used for supporting coiled shaped heating elements made out of Kanthal / Nicrome wire used in resistance wire furnace. These tubes have high softening temperature & excellent thermal shock resistance. Hitemp has mastered different compositions to meet out typical air quenching requirements also. These tubes are available in standard diameter with length upto 1500mm. Element-Carrying Tubes( Length upto 1500 mm ) OD 12 15 20 22 24 29 32 ID 6 8 12 15 15 20 20 Round Muffles ( Length upto 1500 mm ) OD 35 40 44 48 58 62 68 75 85 ID 28 32 37 40 50 56 58 65 75

	TUBE HOLDING BRICKS/ELEMENT HOLDING BRICKS Tube holding bricks are used to support the element supporting tubes where as element holding bricks carry the elements directly in their grooves.
	COLLAR TUBES/ COLLAR BUSHES Hitemp Collar Tubes are used for taking out the electrical terminals from the furnace & to help insulate the structure from the electric current , these tubes are not subjected to the peak furnace temperature yet theses must be strong enough & do not get broken. GAS PASSING TUBES Hitemp gas passing tubes are used to carry different gases to maintain atmosphere in the furnace . These are also used to provide stirring in the molten noble metals in addition to the desired inert atmosphere.
	MULTI HOLE DISC Hitemp Multi hole disc are used in the radiant metallic heaters to insulate elements from the metal tubes. These Disc have high mechanical strength as well as high thermal shock resistance.
	CUP LOCKS, BOBBINS, WASHERS These are used for holding the ceramic blankets in place. These products have high mechanical strength as well as high thermal shock resistance